How to install Jeep Wrangler LED headlights

August 07, 2021 1 min read

Installing your Jeep LED headlights is a pretty easy task. Your first step is to remove the rubber clips and open your hood. Remove the grill on your Jeep so you can reach the headlights. Use basic tools to unscrew the screws on the grill, and be careful not to damage it. To safely remove the grill, push it up with your hands from underneath.

To replace the headlight, remove the four screws that hold the headlight. Next, remove the metal ring around the light to get access to the headlights. Loosen the screws on the adapter and carefully remove your old headlights.

To install your new LED headlights, follow the reverse steps as the original. You must be sure all the connections are secure. If you have a JEEP model that uses an H4 socket, use a converter to plug in your headlights with an H13 socket.

Installing new headlights on a 2007-2017 JK Wrangler is a pretty simple task. This video will walk you through the process in just a few minutes.


Leave a comment

Comments will be approved before showing up.

Also in LED Light

2018 Jeep Wrangler Taillights

October 11, 2021 2 min read

2018 Jeep Wrangler The First Official Images

October 08, 2021 2 min read

8 Points You Need To Know About Jeep Gladiator Bed Tents

October 08, 2021 2 min read