HOW TO INSTALL LIGHT GUARD COVERS ON YOUR JEEP WRANGLER

October 27, 2021 2 min read

If you take a trip on harsh roads or rocky routes, you need to shield your Jeep Wrangler from dirt and also debris. You can secure your LED taillights-- and personalize your Jeep at the same time-- by mounting light guard covers on your vehicle. If you believe you may want to include these important features to your vehicle, checked out listed below to find out how to set up light guard covers on your Jeep Wrangler.

ACTION 1: REMOVE FOUR SCREWS WITH PHILLIPS SCREWDRIVER

To mount your brand-new Jeep Wrangler taillight covers, you first require to remove the old ones from your car. To do this, eliminate the 4 screws that connect the old cover to the taillight with a Phillips-head screwdriver. Make sure to keep this device out of the tool kit due to the fact that you'll require it once more for step 3.

STEP 2: GET RID OF THE OLD TAILLIGHT COVER

After you get rid of the screws, it's time to remove the old taillight cover. This is simple enough; all you require to do is raise the old cover gently off the taillight. It needs to be simple if you've born in mind to eliminate all the screws.

ACTION 3: AFFIX YOUR NEW TAILLIGHT COVER

The next step is to affix the brand-new taillight cover. Carefully position the new cover over the headlight as well as use your Phillips-head screwdriver to affix the four new screws. Ensure the screws are not too limited or loose. If they are also loose, the light guard cover can fall while you're driving. If they are too tight, you might harm the Jeep as well as the light guard cover.

STEP 4: REPEAT THE PROCESS

You have now effectively set up a light guard cover on one taillight. Currently, you just need to replace the light guard cover on the other taillight. It may look a little weird if you set up only one light guard cover!


These actions instruct you how to install light guard covers on your Jeep Wrangler. Before you go off-roading or driving on harsh backroads, secure your LED taillights with light guard covers.

You can secure your LED taillights-- and individualize your Jeep at the same time-- by mounting light guard covers on your lorry. If you think you may desire to add these beneficial features to your vehicle, reviewed below to find out exactly how to set up light guard covers on your Jeep Wrangler.



If they are as well tight, you can harm the Jeep as well as the light guard cover.

You have currently efficiently set up a light guard cover on one taillight.

HanPolly
HanPolly


Leave a comment

Comments will be approved before showing up.


Also in LED Light

DIFFERENT TYPES OF CAR LIGHTS AND THEIR PURPOSE ON THE ROAD

October 30, 2021 3 min read

MOST POPULAR MODIFICATIONS FOR YOUR JEEP WRANGLER

October 29, 2021 2 min read

14 BENEFITS OF A JEEP WRANGLER THAT'LL MAKE YOU WANT ONE

October 27, 2021 5 min read